6000 series Aluminum Tube for New Energy Cars
|Terms of Trade:||FOB,CIF,EXW|
|Min. Order:||5 Ton|
|Delivery Time:||30 Days|
|Packaging:||export shipment package|
|Productivity:||100000Ton per Year|
|Place of Origin:||China|
|Supply Ability:||100000Ton per Year|
Model No.: TRU-HE1020
6000 series Aluminum Tube for New Energy Cars
Features of our aluminum flat tube:
1. Bright, no corrosion, no oxidation.
2. Straight, no deformation.
3. Strong, tough, have a perfect corner bending at 90 degree.
4. Neat and smooth cutting section, no burr.
5. High frequency welded, precise in specifications, easy to install.
6. Radiator tubes can be custom-made to meet your special requirements.Our Aluminum Micro Channel Tube can be widely used for heat sink / transfer.
Like evaporator, air conditioner, condenser, heat exchanger, freezer, oven gas, boiler and so on.
The material can be 1050/1060/1070/3003/3102 or as customer’s request.
Temper O-H112,H112,F.Surface treatment:
anodizing, polishing, turning, power coating, mill finish etcFAQ
Q: What is your terms of payment ?
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5 kg),;
after confirmation, 25-30 days for mass production.
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q:Could you provide sample?
A:Yes, We are honored to offer you samples for quality check.
Q:Is sample order accepted?
A:Yes,we accept sample order and we can provide design service!Aluminum is the material of choice for automotive lightweight designs. Weight-reduction efforts in automotive design and construction have increased significantly in recent years. This is in large part due to economic, political and social pressures to reduce fuel consumption and CO2 emissions around the globe.Trumony Aluminum Ltd, founded in 2006, is a leading supplier of critical heat transfer material for automobile and industrial cooling sectors.Our advantage
Since 2004, we have rich experience in this industry in China;
Good reputation in household foil areas;
We start our productions from aluminum ingot,so we can control the quality as well;
We have our own development department for new material research;
All parts of ladder is self manufacturing, we have price advantage.
Good experience and cooperation with big client in the world;
With Certificate ISO9001-2008;
Sample order is acceptable
High performance cost ratio;
Fast delivery time;
Good communication skills, and good service and understandings for customersDesign:
OEM, ODM, or design by ourselvesWe have varies of specifications, covering automotive, household, commercial, light industrial condensers. Precision flat tubes for all aspects such as evaporators, as well as various types of aluminum profiles.
1. We have the ability to independently design and develop molds. Many times to overcome key projects with high difficulty in China. Exclusive supply to customers.
2. We have a modern production capacity. Aluminum alloy flat tubes ( harmonica tubes ) that can meet customer requirements with high precision, high tolerance and no chip cutting or indentation.
3. We jointly develop the molds with international renowned companies. Our molds can greatly increase the service life of the abrasive tools. Under the premise of reducing production costs and guaranteeing product quality, the procurement cost of different types of pipes is reduced by 10-15%We provide products cover 1,3,4,5,6,7 and 8 series aluminum alloy and so on many varieties, many specifications of the product series. our products are widely used in printing plate making, transportation, container, building decoration, aerospace, high-speed train, new energy vehicle, intercity rail trains, machinery, electrical appliances, electronic communications, petroleum chemical industry, energy and other industries.
|Alloy Code||Temper||Tensile Strength Rm(Mpa)||Yield Strength(Mpa)||Elongation(%)|
|TR-166Etc. Tube material||H24||185-235||≥150||≥8|
|TR-116,TR-316 Etc.tube material||H14||140-185||≥125||≥3|
|OD||OD Tolerance||ID Tolerance||Roundness||straightness||Circular run-out|
|No||Alloy||Temper|| Tensile |
| Yield |
|1||1050||O/F/H111/H112||≥ 65||≥ 20||≥ 25|
|2||1100||O/F/H111/H112||≥ 75||≥ 20||≥ 25|
|3||1197||O/F/H111/H112||≥ 80||≥ 25||≥ 20|
|4||3102||O/F/H111/H112||≥ 75||≥ 20||≥ 25|
|5||3R03||O/F/H111/H112||≥ 80||≥ 25||≥ 20|
Company Introduction: Trumony Aluminum Co.LTD build from 2006, have export over 53 countries of worldwide. Our main products are aluminum alloy cladding material, cole material and other aluminum products like aluminum sheet, aluminum plate, aluminum coil, aluminum foil, 6101 T63 High Conductivity Aluminum Conduction Plates, aluminum strip, aluminum pipe, aluminum tube, aluminum heat exchange etc, for automobile heat exchangers area such as radiator, intercooler, condenser, evaporator and industrial heat exchangers, like electricity power radiator, air conditioner etc.There are complete sets of modern production and testing equipment operation workshops for casting, hot rolling, cold rolling, coating finishing and advanced check-out for researching and testing,such as WDW-3010- micro-controlled electronic universal testing machine,CALS-2000 aluminum alloy metallographic image analysis system etc.
Trumony Aluminum Co.LTD build from 2006, have export over 53 countries of worldwide. Our main products are aluminum alloy cladding material, cole material and other aluminum products like aluminum sheet, aluminum plate, aluminum coil, aluminum foil, 6101 T63 High Conductivity Aluminum Conduction Plates, aluminum strip, aluminum pipe, aluminum tube, aluminum heat exchange etc, for automobile heat exchangers area such as radiator, intercooler, condenser, evaporator and industrial heat exchangers, like electricity power radiator, air conditioner etc.There are complete sets of modern production and testing equipment operation workshops for casting, hot rolling, cold rolling, coating finishing and advanced check-out for researching and testing,such as WDW-3010- micro-controlled electronic universal testing machine,CALS-2000 aluminum alloy metallographic image analysis system etc.
Trumony Aluminum Limited
Trumony Aluminum Limited was established in 2006 and mass production began in Jan. 2007. With ISO 9001:2000 and ISO/TS16949:2002 certificated, we are one of the global leading and most specialized suppliers of heat exchanger materials for automobile, HVAC and industrial cooling tower. With the development of the new energy car industry.Trumony dedicated to provide different solution to the BTMS battery thermal management system.We can provide different types of water cooling plate.Such as brazing type,extruded type.roll bond plate type water cooling plate. Custom development or manufacturing is also available to offer.
Bring technology to the ground by material innovation and development,we are always on the road.
- Company Name: Trumony Aluminum Limited
- Representative: Li Li
- Product/Service: Aluminum Pipe , Aluminum Coil , Aluminum Sheet , Aluminum Tube , Aluminum Plate , Aluminum Strip
- Capital (Million US $): 30 Millions RMB
- Year Established: 2006
- Total Annual Sales Volume (Million US $): Above US$100 Million
- Export Percentage: 31% - 40%
- Total Annual Purchase Volume (Million US $): Above US$100 Million
- No. of Production Lines: 4
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Jiangsu Province, China
- Contact Person: Ms. Tracy
- Tel: 86-512-62532616
Premium Related Products